靜電粉末噴涂儀器款型

STR-NKP-1型給水管開口處涂裝器  Spraying machine for piping inner wall

◆選用使用范圍 Applicable scope

使用來孔眼及大型管網的內部靜電粉末噴涂，它是采取無氣靜電粉末噴涂機運送來的高壓電工業漆，依據特別制造的噴口，使工業漆霧化吸入后會構成揚聲器形（園球形、漏空），平滑地噴在管網內外壁，而使滿足管網的靜電粉末噴涂。 NKP-1型大部分用作于Ф50-Ф300mm的管網，金屬涂料粘稠度不容許要高于80秒（4號福特杯）。如果你水性金屬漆凝固點遠遠超出80秒，需要加稀釋液劑稀釋液。NKP-1型關鍵上受到輸送管道的長度規定，但最棒不生長于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

按裝方框圖 Installation to which